Baseboard or Baseboard Installation Questions And Comments Here
Do you have baseboard questions or baseboard installation questions? This is the place if you have questions about coping, cutting for an outside corner, doing a baseboard return or just anything to do with baseboard. I would be happy to help you and answer any questions. It’s free and easy so go ahead I urge you to ask away and even answer some questions if you would like.Add Your Question or Comment or just scroll down the page.
If you have questions or comments that are not about Baseboard or Baseboard installation, please do not ask them on this page.
Go Here For Doors, Windows and General Casing Questions
Go Here For Other Trim Carpentry Questions - wainscoting, crown molding, chair rail, cabinets, shoe molding ETC.
Go Here For Hand Railing Questions
My way of doing things is by all means not the only way in any part of finish carpentry. Please help me by contributing to the answers.
You can ask a question, answer a question, make comments or do all. Whether you are an expert or a beginner at finish carpentry you are invited to participate. Everyone benefits from your contributions.
You can still use the contact button if you have a question that you feel would not benefit others or needs a personal response.
Please be thorough and provide as much information as possible. If a picture could help describe the situation, please upload a picture (there are instructions for uploading pictures).
Baseboard and Baseboard Installation Questions and Comments
Do you need a baseboard question answered? This is the place where you can ask a question or comment.
It's free and it's easy to do. Just fill in the form below, then click on "Submit Your Question-Comment".
What Other Visitors Have Said
Click below to see contributions from other visitors to this page...
inside baseboard corner
Can the inside corner of the baseboard just be cut at 45 degree angle - both pieces.
Rather than cut the coping which seams more complicated?
Thank ...
Concerning chair railing or molding
Not rated yet
I want to put chair railing on a wall that the door way
doesn't have wood trim around the door. How would you finish the end of the rail to make it look ...
Coping Baseboards
Not rated yet
Thanks for sharing your instructions on coping baseboard! Simple miter cuts just didn't look right. After a few practice runs with your method I have ...
Baseboard Transition To Cabinet
Not rated yet
Hello. Thank you for your services. I've been searching for an answer or photo and not finding what I need. The bathroom vanity cabinets are installed....
Coping Baseboards
Not rated yet
Hi Pat,
I just wanted to let you know that I tried the coping method with the dremel tool. Wow, that works really well. I use to use my scroll saw, and ...
Baseboard height?
Not rated yet
Can the baseboard be as high as 8"? I'm installing paneling and could use a higher baseboard to for a seamless complete look. I held up some possible ...
Colonial Trim Trouble with 90 degree inside corner
Not rated yet
I cannot get this 90 degree inside corner right on my colonial trim. The finished part at the top still leaves a big enough gap that it won't look right ...
Not a 45 degree angle baseboard
Not rated yet
Not all corners are 45 degrees. My hallways e.g. have possibly 70 degrees outside and insides angles. How do you make those baseboards fit ?
I have not ...
Using a mitre saw
Not rated yet
The base I'm using is too tall for my saw so I have to lay the it flat. What is the best approach to make the 45 degree cut?
Answer
Hi Tony
Most of ...
Baseboards
Not rated yet
What would it cost per ft. to install a 4in. M.D.F Base board. A local contractor wants $3.50 a ft. I thought that was high.
ANSWER
Hi Mark
That ...
Baseboard Transition from Hardwood to Laminate flooring
Not rated yet
We have recently renovated and installed a laminate flooring in the hallway. This floor is much higher than the hardwood floor in the livingroom. The ...
Nails For Baseboarding
Not rated yet
What gauge or type of nail or length needed for baseboard when using a power nailer?
Answer
I use a 16 gauge with 2 1/2 inch nails but that is just ...
What's First Baseboard or Flooring
Not rated yet
In a new room, what gets installed first. Baseboard or pre finished oak flooring?
Answer
It's easier to install the baseboard after the flooring is ...
Baseboard Installation Questions
Not rated yet
I have a couple baseboard questions for you. If you are baseboarding a room that is 12 feet 6 inches and the longest trim I can find in my style is 12 ...
