There are a number of reasons to learn how to install cabinet hardware. This process can be done to update your kitchen, increase the safety of a room or to simply replace some damaged pieces of hardware. The process is also going to be one of the easiest things you will experience as well.
For this process, you are going to need to have both a drill and a screwdriver. This is important as these will make the installation process go along a bit easier. Along with this, you should also have a pencil available that you will use for marking off areas as you learn how to install cabinet hardware.
To begin this process, you will want to start off by adding the hardware you have for the door hinges of the cabinets. This should match in color and style to the hardware that adorns the front of your cabinets. If this is a fresh install, you will want to match up the hinge locations and then drill pilot holes into the wood. Depending on the weight of these doors, you may wish to add an additional hinge to the setup.
Now, you will ensure that everything goes in square and then you will want to secure the door in place. As you learn how to install cabinet hardware, you will find that square corners and the ability to swing without getting your cabinet doors jammed are important things to focus on.
Once you have your cabinets up, you can then install the hardware you have selected for the front of your cabinets. There are of course a couple different approaches that will be used for this process. For example, if you are installing new handles, then you want to make the holes for the handle and then add in some pilot holes and secure the new handle in place. Before you set the handle, you will need to ensure that you have it perfectly level for visual appeal.
A knob in turn will require that you drill a hole into the entire cabinet. Then you will take your new knob and push it against the cabinet door and trace where it will end up falling on your cabinet. At that point, you will find the center point of the drawing and place a hole in it. This pilot hole needs to be done carefully as it could potentially damage the door.
When this is done, then you will increase the size of the hole and secure the knob that you have attached to the door. It is important that you do take a few moments to ensure that you have placed the new hardware on the front of the cabinet properly. It should be level and no appear crooked to the eye before you fully secure the bolt in the back.
Learning how to install cabinet hardware isn't a complicated process at all. As long as you have the essential tools for this process, you are going to find that you can have some very effective results. Your main goal should be to match the new hardware with the cabinet styles you are putting them on so it looks like one seamless process, then you can reveal in the absolute beauty that your newly installed cabinet hardware has.