Makita Hammer Drill

Makita Hammer Drill

If you’re looking for an efficient hammer drill to insert fasteners or drill holes in very dense or hard surfaces, Makita Hammer Drill will be your ideal option. Makita is a leading and one of the most reputed manufacturers of power tools. The company manufactures an eclectic array of tools, including cordless hammer drill and spline rotary hammer drill. Unlike other traditional rotary drills that break down, when used on tough or hard objects, This hammer drill can be used with masonry materials, including stone, brick and concrete. Makita hammer drill drills in the same way as a jackhammer does, with precise and strong blows to facilitate drilling into masonry and concrete.

Makita has been a pioneer in power tools since it introduced its 9.6 volt cordless drill driver, and it doesn’t disappoint with its lineup of hammer drills either. Drills and hammer drills need to be loaded with power and this hammer drill packs a lot in this department. It can easily work a 0.75 inch auger bit through an 8-3/4 inch pressure that is treated with lumber and composite decking material. The same goes for blocks of concrete, through which it can drill as many holes as required with relative ease.

In addition, this hammer drill allows the user to work with comfort. This is a huge blessing, as when drilling holes for professional jobs or difficult home jobs your hands may have to wear severe hardship while handling the drill. The tapered handle of the Makita Hammer Drill offers optimum comfort for the user with its smart design. The taper itself allows you to hold the drill in virtually any position without losing balance of the power tool. In addition, the trigger is well placed, so that you can easily and comfortable pull it. The rubber grip on the handle allows you to firmly hold on to the hammer drill, ensuring your safety in the process.

Specifications:
• Capacity: Concrete- 7/8"; Steel- 1/2"; Wood- 1"
• No Load Speed: 0 - 1,100 RPM
• Blows per Minute: 0 - 4,000 BPM
• Impact Energy (J): 1.9
• Bit Type: Accepts SDS-PLUS Bits
• Battery: 18V LXT Lithium-Ion
• Overall Length: 14-1/8"

Pros:
• These hammer drills have a light-weight design to prevent your arm from being worn out, when drilling on hard surfaces.
• It comes with built-in light, allowing you to carry on your work conveniently even in darkness.
• Makita hammer drill doesn’t have a very large size. It’s small size makes it easier to fit into smaller, tight areas.
• Unlike most other hammer drills, which have a short shelf life, Makita hammer drill is built from solid, supreme quality materials that make it durable. It’s capable enough of handling continuous wear it is subjected to when drilling holes on tough surfaces.
• One of the most notable features ofthis hammer drill is that it’s got a well-balanced feel, which makes it very convenient to use.

Cons
• Batteries tend to wear out completely over time, holding on to less power after each recharge

Bottomline:
This hammer drill is a well-made power tool that can appeal to both professionals as well as home owners. It has the perfect blend of technology and common sense, with loads of features. Looking at the overall package this hammer drill scores a perfect 5/5.

Return To Main Tool Reviews Page

Return From Makita Hammer Drill Page to Home - Finishcarpentryhelp.com.

---